little man pajamas made from a men's shirt
A few weeks ago I made some jammies for my baby daughter using a big men'due south sweatshirt I'd purchased on clearance for $one. I hitting up a few garage sales this past weekend and plant a bunch of men's shirts for 50 cents each, so I decided I'd effort to use a similar process to turn ane of the shirts into pajamas for my four year one-time.
They turned out great. I was able to use the sleeves for pant legs (which resulted in a nicely cuffed leg with no work on my part), the original hem for the bottom of the shirt, and the ribbed polo collar for dainty cuffs on the sleeves (again with very niggling work). I beloved that refashioning ofttimes results in a more professional person looking issue than sewing from scratch, often for much less money and manner less effort. Hither'due south the earlier:
I honey stripes for little boys, and so as soon as I saw this soft and sturdy polo I knew I'd made something for my little human being. I started past cutting off the sleeves and tracing an existing pair of jammie pants. Notice how my existing pair is a little longer at the acme? That's considering my sleeves weren't quite long enough – but it's no biggie, because instead of turning down the tiptop to add together an elastic casing, I added a yoga waistband, but like in the baby girl version. Does information technology look girly in the end result? Non at all.
The pants took about x minutes because they just demand 3 seams and don't require hemming (cheque out the baby girl version for footstep-by-step photos). All y'all take to do is run up upward the inseam, put the two legs together and sew up the rainbow, and stitch on a yoga waistband. Fantastic!
Side by side, I cut out the bodice of the shirt, again using an existing shirt to get the correct shape (remember to add together seam allowance when cutting!)
I used the shirt to cut i half of the bodice, and so flipped it over and cut down the other side.
I cutting sleeves from the rest of the shirt fabric, again getting the shape from an existing shirt.
Shirt structure is pretty simple equally well. Place front and dorsum RST and sew shoulder seams.
Next, sew on your sleeves (stride-by-step photos here). At this betoken I realized the shirt's polo collar was the exactly same ribbing material used at the lesser of the sleeves (now pants), so I decided to cut upwards the collar and use information technology as a cuff at the bottom of my sleeves. This was then much simpler than hemming! I just place the collar on the right side of each sleeve and sewed forth the raw edges, as shown.
Next, you can sew up the sleeve and downwardly the body of the shirt (pitiful, the gage is non on in this photo merely information technology should exist!).
Because I started with a polo shirt that had a fiddling longer hem in the back than the front, I sewed downwards the body but stopped near an inch above the front end hem.
This immune me to press the side seam open up and then add bluish item stitching that you tin can encounter below – now the hem of the fiddling shirt looks just like the polo hem of the large shirt – little details like this make your finished projection wait a little more professional.
Later that all that was left was adding ribbing around the neck. I tried the shirt on my son to make sure the cervix pigsty was large plenty to get over his head. Then I grabbed the scraps of the leftover shirt and cut a long narrow strip all the way across, making sure information technology included one of the blue stripes. I folded my strip correct along the stripe line and attached it to the neck, beingness certain to pull the ribbing tighter than I pulled the neckline of the shirt (step by step pics in this post).
In one case the ribbing was fastened, I pressed it to the top and went effectually the neckline once more with a blue directly sew together – making sure to streth the unabridged thing every bit I sewed and then that line of stitching wouldn't be too tight when my son tried to put information technology on.
I wanted to taper the ribbing off at the dorsum right in the middle, but I was too lazy to measure and it concluded upwards kleptomaniacal. That happens. Did I unpick the whole thing and put information technology together right? No. My son doesn't mind and no one else volition ever observe.
He actually thinks his new pajamas are pretty awesome.
Perfect for snuggling upwardly with his monkey, Jim. (Jim has jammies too – along with a free pattern download for Build-a-Bear sized animals – click here!)
New, cute pajamas for 50 cents. I'm adept with that.
Reader Interactions
acostagailintence.blogspot.com
Source: https://www.itsalwaysautumn.com/little-man-pajamas-made-from-a-mens-shirt.html
0 Response to "little man pajamas made from a men's shirt"
Post a Comment